The Laptop Battery Says 100 But Dies When Unplugged: Possible Solutions

If your operating system shows that the battery of your laptop is fully charged, but it dies the moment you unplug your machine, chances are that the battery of the machine is not working. In most cases, it is a sign that you need to replace the battery. However, this is not the only reason behind the problem. In this article, we are going to you take a look at different solutions to this problem. Read on to find out more.

Downgrade to the previous functional version of Windows

If you have got your Windows operating system upgraded to Windows 10, especially the 1809 update, your issue may be associated with the updated version of Windows.

Faulty battery

Another reason why your laptop turns off as soon as you unplug it from the power source is the faulty battery. Either your battery is faulty or it has fully degraded. In this case, you can try replacing the battery with a new one. Alternatively, you can try the solutions described below.

#1: Change the Power Management Settings

In some cases, you have this problem due to improperly configured power management settings. If you want to reset the settings, you can follow the steps given below:

1. In the Start Menu, go to the power plan and hit on “Edit Power Plan”.
2. Next step involves changing the advanced power settings.
3. Now, look for the processor power management settings
4. Set the Minimum Power State of 20%
5. Next, go to Display settings and choose adaptive brightness
6. Finally, turn on both on plug-in and battery

#2: Reinstall Battery Drivers

Another solution is to reinstall the battery drivers. If you unplug the power cable, the defective drivers may power off your machine. Given below are the steps to reinstall the drivers.

1. In the start menu, type “Device Manager” to launch the program
2. Extend “batteries”
3. Now, right-click on all ASPI options
4. Next, choose “uninstall”
5. Once uninstalled, you can restart your machine

#3: Launch Power-Troubleshooter

You can use the inbuilt troubleshooter to resolve your problem in Windows 10. Given below are the simple steps you can follow to apply this solution:

1. Press Win key +1 to launch settings
2. Go for Update and Security
3. Go to Find and Fix other problems for Power Options
4. Now, you can start the troubleshooter

#4: Reset your machine

If you bring the power storage of the hardware down, you can resolve several problems with your PC. In other words, you need to go for a hard reset or power reset. Given below are the instructions to help you out.

1. Shut down your machine
2. Press and hold the power button until the machine goes off
3. Disconnect all other devices connected to your laptop
4. Remove the power cord
5. Take out the battery pack
6. The power light will start blinking
7. Reconnect the power cable and switch on your computer

So, if you follow these solutions one by one, chances are that you will be able to solve your problem.

Related posts

Reasons to Take a Second Job

In today’s fast-paced world, finding effective debt solutions and achieving financial goals…
Read more

Empowering New Ways of Working with Microsoft Copilot Plugins

It’s clear that AI is a major focus for Microsoft right now. Interest in AI and what it can do for…
Read more

Lipstick Container

Lipstick containers, also referred to as lipstick cases, are essentially made as the packaging of…
Read more
Become a Trendsetter
Sign up for Davenport’s Daily Digest and get the best of Davenport, tailored for you. [mc4wp_form id="729"]

Leave a Reply

Your email address will not be published. Required fields are marked *